Tuning Tetrazole Photochemistry for Protein Ligation and Molecular Imaging

Photochemistry provides a wide range of alternative reagents that hold potential for use in bimolecular functionalisation of proteins. Here, we report the synthesis and characterisation of metal ion binding chelates derivatised with disubstituted tetrazoles for the photoradiochemical labelling of monoclonal antibodies (mAbs). The photophysical properties of tetrazoles featuring extended aromatic systems and auxochromic substituents to tune excitation toward longer wavelengths (365 and 395 nm) were studied. Two photoactivatable chelates based on desferrioxamine B (DFO) and the aza-macrocycle NODAGA were functionalised with a tetrazole and developed for protein labelling with ⁸⁹Zr, ⁶⁴Cu and ⁶⁸Ga radionuclides. DFO-tetrazole ( 1 ) was assessed by direct conjugation to formulated trastuzumab and subsequent radiolabelling with ⁸⁹Zr. Radiochemical studies and cellular-based binding assays demonstrated that the radiotracer remained stable in vitro retained high immunoreactivity. Positron emission tomography (PET) imaging and biodistribution studies were used to measure the tumour specific uptake and pharmacokinetic profile in mice bearing SK-OV-3 xenografts. Experiments demonstrate that tetrazole-based photochemistry is a viable approach for the light-induced synthesis of PET radiotracers.     

Multipod structures of lamellae‐forming diblock copolymers in three‐dimensional confinement spaces: Experimental observation and computer simulation

The three‐dimensional (3D) confinement effect on the microphase‐separated structure of a diblock copolymer was investigated both experimentally and computationally. Block copolymer nanoparticles were prepared by adding a poor solvent into a block copolymer solution and subsequently evaporating the good solvent. The 3D structures of the nanoparticles were quantitatively determined with transmission electron microtomography (TEMT). TEMT observations revealed that various complex structures, including tennis‐ball, mushroom‐like, and multipod structures, were formed in the 3D confinement. Detailed structural analysis, showed that one block of the diblock copolymer slightly prefers to segregate into the particle surface compared with the other block. The observed structures were further elaborated using cell dynamics computer simulation. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1702–1709     

Skin layer detection of optical coherence tomography images

In this paper, we present an image processing algorithm to automatically and more precisely detect the boundary between the main skin layers: stratum corneum, epidermis, and dermis. The aim of the proposed skin layer detection algorithm is to assist the dermatologists to measure the epidermal thickness (ET) for skin diseases diagnosis and also to assist pharmacologists so that they can make a better decision for prescribing according to the advancement of the skin disorders characterized with ET change.     

Morphological Investigation of Midblock‐Sulfonated Block Ionomers Prepared from Solvents Differing in Polarity

Recent developments regarding charged multiblock copolymers that can form physical networks and exhibit robust mechanical properties herald new and exciting opportunities for contemporary technologies requiring amphiphilic attributes. Due to the presence of strong interactions, however, control over the phase behavior of such materials remains challenging, especially since their morphologies can be solvent‐templated. In this study, transmission electron microscopy and microtomography are employed to examine the morphological characteristics of midblock‐sulfonated pentablock ionomers prepared from solvents differing in polarity. Resultant images confirm that discrete, spherical ion‐rich microdomains form in films cast from a relatively nonpolar solvent, whereas an apparently mixed morphology with a continuous ion‐rich pathway is generated when the casting solvent is more highly polar. Detailed 3D analysis of the morphological characteristics confirms the coexistence of hexagonally‐packed nonpolar cylinders and lamellae, which facilitates the diffusion of ions and/or other polar species through the nanostructured medium.

     

正电子发射显像剂O-(2-[18F]氟乙基)-L-酪氨酸的新型前体的合成

设计合成了5种新型正电子发射断层显像剂[O-(2-[¹⁸F]氟乙基)-L-酪氨酸的前体化合物：N-叔丁氧羰基-O-(2-甲磺酰/对硝基苯磺酰)-氧乙基-L-酪氨酸甲酯(9a,11a)和N-叔丁氧羰基-O-(2-甲磺酰/对甲苯磺酰/对硝基苯磺酰)-氧乙基-L-酪氨酸叔丁酯(9b,10b,11b)。 这些化合物以L-酪氨酸为原料,先与甲醇发生酯化反应或与乙酸叔丁酯进行酯交换,再用叔丁氧羰基保护氨基,最后以碳酸钾为碱、18-冠-6为相转移催化剂与乙二醇的磺酸酯在丙酮溶液中加热回流形成目标化合物,总收率为30%～67%。     

Revealing the Distribution of the Atoms within Individual Bimetallic Catalyst Nanoparticles

To be able to correlate the catalytic properties of nanoparticles with their structure, detailed knowledge about their make‐up on the atomic level is required. Herein, we demonstrate how atom‐probe tomography (APT) can be used to quantitatively determine the three‐dimensional distribution of atoms within a Au@Ag nanoparticle with near‐atomic resolution. We reveal that the elements are not evenly distributed across the surface and that this distribution is related to the surface morphology and residues from the particle synthesis.     

PET Imaging of Bacterial Infections with Fluorine‐18‐Labeled Maltohexaose

A positron emission tomography (PET) tracer composed of ¹⁸F‐labeled maltohexaose (MH¹⁸F) can image bacteria in vivo with a sensitivity and specificity that are orders of magnitude higher than those of fluorodeoxyglucose (¹⁸FDG). MH¹⁸F can detect early‐stage infections composed of as few as 10⁵ E. coli colony‐forming units (CFUs), and can identify drug resistance in bacteria in vivo. MH¹⁸F has the potential to improve the diagnosis of bacterial infections given its unique combination of high specificity and sensitivity for bacteria.     

Investigation of dense slurry suspensions with coaxial mixers: Influences of design variables through tomography and mathematical modelling

The coaxial mixers enhance the suspension of concentrated slurries in an agitated reactor. In this research work, the complex slurry suspension and dissemination behavior in a coaxial slurry mixing system (comprised of a close clearance anchor rotating with a low speed and an inner axial impeller rotating with a high speed) was analyzed employing ERT (electrical resistance tomography, a non-intrusive flow visualization technique), and computational fluid dynamics (CFD). The numerical models were validated by comparing the axial solid concentration profiles generated using the ERT data and the CFD simulation results. The influences of various important parameters such as the diameter of the inner axial impeller, the inner impeller type, and the inner impeller spacing on the hydrodynamic characteristics of the slurry suspensions in a coaxial mixing vessel were thoroughly analyzed. The radial and axial velocity profiles of solid particles were generated using the validated mathematical models. The assessment of energy loss due to the solid–solid collisions, the particle–fluid frictions, and the particle–vessel wall collisions was conducted. The evaluation of optimum inner impeller clearance and inner impeller diameter is essential to attain a high degree of solids suspension and dissemination in a coaxial slurry mixing system.     

基于LabVIEW的光学相干层析成像控制系统

 为了实现对光学相干层析成像系统的实时自动监控,在光学相干层析成像技术的基础上以LabVIEW为开发平台,设计调试了一套生物组织光学特性测量的控制系统。该系统主要包括参考臂驱动程序模块和数据采集卡的数据采集程序模块,各模块既相互独立又有机地组成一个整体。使用该系统对不同浓度的Intralipid组织模拟液进行了测量,实验结果表明模拟液的散射系数可靠,而且系统具有开发周期短、成本低、维护简单、可移植性强等特点。